Regarding the Maintenance and Care of Neon Signs

You really ought to give that neon sign an excellent, in-depth cleaning. Neon signs are particularly prone to the accumulation of grime, mildew, oil, insects, and spider webs after years of constant use and a lack of care.

This is especially true of older signs. If you want your neon lights to retain their eye-catching attractiveness and vivid colours for the most extended time possible, you must subject them to routine maintenance.

Neon signs are an excellent option for giving your firm a unique and thrilling edge, but for them to keep their alluring glow, they need to be cleaned regularly. Neon signs, particularly those positioned in prominent outdoor places, are commonly used because they are an effective way of client recruitment.

Alternately, neon lights can be used as a source of practical lighting inside, imparting a dash of personality and a splash of colour. This is one of the many ways in which they can be utilised. The lack of maintenance you give your signage prevents potential customers from purchasing.

Modern neon signs encased in protective polymers have replaced the fragile neon glass tubing used in conventional neon signs with more resilient LED tubing.

In contrast to conventional bulbs, LED neon lights have a surface temperature that is tolerably cool to the touch even when operating at their maximum brightness. This is the case even when the lights are at their brightest.

As a result of this, the job of keeping up with the maintenance of modern neon signs has become far less labour-intensive. Eliminating Dust Unlike older neon signs, which frequently contain noble gases known to cause injury and cannot be touched without risk, modern neon signs do not contain any gas and can be safely touched.

However, before continuing with anything else, ensure the plug has been removed, and the neon sign has been turned off. Only then may you proceed. After you have finished this, wait a few minutes before touching the sign again since, if it has been on for a while, it will most likely be warm.

If you touch it too soon, you could burn yourself. It would help if you started using a feather duster to remove the larger pieces of Dust from the area. After that, the remaining Dust can be removed by gently brushing it away with a long-bristled nylon brush.

This should be done to ensure that no dust is left behind. Before deciding whether or not a wet cleaning is necessary to remove stubborn stains and filth, the Dust should be removed by vacuuming or sweeping it up.

Only then can it be determined whether or not a wet cleaning is necessary?

Cleaning of the Grime and the Stuck-On Spots Put one-half cup of household ammonia and one-half cup of water into a container made of plastic. Shake the mixture well, and use it to remove stubborn stains and filth.

Give the bottle a good shake. The next step is to squeeze a towel drenched in the solution to extract as much of the liquid as possible from the towel.

It is strongly suggested that signs be meticulously cleaned with a damp cloth to remove any stains or dirt that may have accumulated on them.

Because of the polymer covering, maintaining LEDs involves much less work than it used to. Before commencing the process of wet cleaning, you must still turn off your sign and detach it from the energy supply before you can start washing it with water.

Need to decide on making use of ammonia?

You can also exchange the ammonia for a solution that consists of baking soda and vinegar. This is yet another alternative. You mustn't proceed on this path at any cost. DO NOT fully submerge the sign in the cleaning solution or water during the cleaning procedure.

This is to prevent the sign from becoming damaged. In addition to this, heightened awareness is necessary if the sign contains paint that blocks out the light. Perform a preliminary test on a tiny area in one of the sign's corners to see whether or not the cleaning solution will cause the paint to chip or flake.

Before moving on to clean the rest of the sign, this step needs to be completed first.

Do you possess the self-assurance required to buy a cutting-edge LED neon sign?

In this section, you can look through our selection of pre-made neon signs. Or, if you would prefer a neon sign that is customised just for your business, please get in touch with us as soon as you can if this interests you.